ZJ400Y
02 使用条件 Use conditions required
序号 NO. |
参数名称Parameters | 产品代号Product code |
ZJ400Y系列series | ||
1 | 环境温度Ambient temperature: | (-40~+60)℃ |
2 | 相对湿度Relative humidity: | +20℃达98%(Up to 98%at +20℃) |
3 | 固定处的振动 Vibration freq.at the fixed position: |
(10~200)HZ、加速度 Acceleration≤3.5g |
4 | 冲击Shocking | (60~100)次/分、加速度≤4g (60~100)time/minute、Acceleration≤4g |
5 | 安装位置Mounting directions | 任意0ptional |
序号 NO. |
参数名称Parameters | 产品代号Product code | |||||||
ZJ400Y系列series | |||||||||
1 | 线圈额定电压Rated coil volt (V DC) | 12 | 24 | 30 | 48 | 60 | 80 | 120 | |
2 | 线圈功耗Coil Power dissipation(W) | 13~20 | |||||||
3 | (20±5)℃下,冷态动作电压 Operating volt in cold state at (20±5)℃(V) |
吸合 Pick-up |
不大于线圈额定电压的70% Not above 70%of rated coil volt |
||||||
释放 Release |
线圈额定电压的(5~40)% Rated coil volt |
||||||||
4 | 电源电压波动范围 Fluctuating range of power supply volt |
(85%~110%)额定电压 (85%~110%)rated volt |
|||||||
5 | 主触点电路额定电压 Rated volt of contact circuit(V DC) |
60 VDC | |||||||
6 | 主触点电路额定负载电流 Rated load current of contact circuit(A) |
400A | |||||||
7 | 100A负载下主触点接触压降 Contact volt drop of contact at 100A |
≤50mV | |||||||
8 | 抗电强度Puncture(volt)strength | 50Hz,1000V AC,1min | |||||||
9 | 主触点最大通断能力 Max.make-break ability of contact |
通断1次4倍额定负载电流,通电时间(Connect four times rated load current,make and break once for)5ms |
|||||||
10 | 电寿命Electric life | 50,000次Ops | |||||||
11 | 机械寿命Mechanical life | 100,000次Ops | |||||||
12 | 工作规范Working duty | 连续Continuous |